BIGTREETECH® TFT43 V3.0 Smart Graphic LCD Display Controller for Creality Ender 3, Compatible with UART Serial Screen and 12864 LCD Mode

BIGTREETECH® TFT43 V3.0 Smart Graphic LCD Display Controller for Creality Ender 3, Compatible with UART Serial Screen and 12864 LCD Mode

Features:

✔️ ARM level Cortex-M3 series STM32F205/207VCT6 with 32-bit main frequency 120MHz Master chip.
✔️ Upgrade configuration firmware through SD card, easy to operate.
✔️ Two working modes of UART serial screen and 12864 screen can be selected, and the compatibility is higher.
✔️ The serial screen mode supports two printing methods: SD card and U disk.
✔️ Reserve WIFI interface, support external WIFI module to realize WIFI function.

Wiring Instructions:

1. The wiring process must be carried out under the premise of power off. Only after checking the correct connection of the circuit and the correct insertion of the driver, can the power be turned on to prevent the wrong wiring from causing the board and screen to be burned and causing unnecessary losses;

2. Pay attention to the wire sequence when wiring, and do not reverse it; for the detailed wire sequence, please refer to the PIN file.

Package Includes:

1 x BIGTREETECH® TFT43 V3.0 LCD